GSM security center CG17 (4G) with GSM antenna

Product reference: CECG17(4G)

Communicator that informs customers about security system events with Protegus app or with SMS and/or Voice messages
Communicator that transmits full event reports to Alarm Receiving Centre (ARC).

At stores prices may vary

Price:

€147.02

€121.50 tax excl.

Product information

CG17 is a multifunctional security control panel with an integrated celullar communicator.

With the CG17 you can:

Install a simple security system that can be monitored and controlled remotely.
Control various equipment remotely (e.g. heating and ventilation systems, automatic gates) and monitor temperature.
Notify users about events.
Send event notifications to the receiver of a security company.

Messages to the security company

Reports events to TRIKDIS software or hardware receivers which are capable of working with any monitoring software.
Can report events to SIA DC-09 receivers.
In case connection to primary channel is lost, can send to backup receiver.
Can report events to the central monitoring station using SMS messages. Extremely useful because it works even when IP connectivity is disrupted in the mobile operator’s network.
Cellular network jamming recognition.
Can simultaneously report events to the security company’s receiver and work with the Protegus app. Possible to set priority for sending events to central monitoring station.

Messages to users

Calls specified phone numbers (up to 8 users) and informs about events using recorded voice messages.
Sends SMS messages about events.
“Push” and special sound event notifications using the Protegus application.

System and output control

Using Protegus app.
Using contact (iButton) key reader.
By calling the device’s phone number.
Using SMS messages.
Using an automatic “if…then” algorithm. E.g. when an input is enabled or the temperature exceeds a certain limit, an output will be turned on.
Expander, GPS receiver and battery support
iO series expanders, which increase the number of inputs (IN) and outputs (OUT).
GPS receiver (useful for protecting ATMs and vending machines).
Backup power and charging of 12 V battery.

Settings and installation

Quick and simple installation.
Configuration of device either using an USB cable or remotely using TrikdisConfig software.
Remote updating of firmware.
Two types of access levels (accounts), for the installer and for the administrator.

Inputs and outputs

1 input, 2 outputs and 3 double I/O terminals that can be set either as input (IN) or output (OUT) terminals.
One wire data bus (1-Wire) for connecting temperature sensors (up to 8) and a contact (iButton) key reader.
Using iO series expanders, the number of inputs (IN) or outputs (OUT) can be increased to 12.

Specifications

Parameters	Description
GSM modem frequencies	850 / 900 / 1800 / 1900 MHz
3G modem frequencies	800 / 850 / 900 / 1900 / 2100 MHz
Power supply voltage	16-24 VDC, 16-18 VAC
Current consumption	50 mA (stand-by), Up to 200 mA (transmitting)
Communication with ARC	Encrypted TCP/IP or UDP/IP, SMS
Battery charging current	Max 500 mA
Event encryption, key	TRK / 6 symbol key
Memory	Up to 60 messages
Inputs (max internal)	Up to 4 selectable type input: NC, NO, EOL (10kΩ)
Outputs (max internal)	Up to 5 x OC type outputs, (1 OUT, 2 OUT, 3 OUT – 100 mA; 4 OUT, 5 OUT – 1 A)
Event transmission	Contact ID codes
Encryption key	6 symbols encryption key
Operating environment	From -10 °C to 50 °C, with relative air humidity 80% when +20 °C
Dimensions	95x65x25 mm
Weight	0.10 kg

Type

GSM