Motion detector SLIM-DUAL-PRO Dual-tech

Preces kods: DASLIM-DUAL-PRO

SLIM-DUAL-PRO detects motion in the protected area

Class 3 certified dual-technology motion detector (PIR + MW) with active IR anti-masking. It features digital temperature compensation, false alarm filtering, and adjustable sensor sensitivity. The detector is equipped with a wide-angle lens (can be replaced with curtain or long-range lens), a 7-color selectable LED indicator, tamper protection, an adjustable bracket, and allows remote parameter configuration using the OPT-1 key.

Lasīt vairāk
Cena veikalā var atšķirties
Cena:
€68,99
€57,02 bez PVN

Preces informācija

Dual-tech PIR+MW motion detector with IR anti-masking function

  • Compliance certificate according to EN 50131 requirements for Grade 3 devices

  • Motion detection using two sensors: passive infrared (PIR) sensor and microwave (MW) sensor

  • Adjustable sensitivity for both sensors

  • Possibility to test sensors individually

  • Digital motion detection algorithm

  • Digital temperature compensation

  • Digital filter for signals received by the microwave sensor, ensuring resistance to false alarms caused by power networks and discharge lamps

  • Operating modes: basic or advanced

  • Option to enable/disable creep zone protection

  • Wide-angle lens specially designed for SLIM LINE detectors

  • Option to replace the wide-angle lens with curtain (CT-CL) or long-range (LR-CL) lens

  • Active IR anti-masking compliant with EN 50131-2-4 requirements for Grade 3 devices

  • Option to configure detector operating parameters using the OPT-1 keyfob

  • Built-in end-of-line resistors (2EOL: 2 x 1.1 kΩ / 2 x 4.7 kΩ / 2 x 5.6 kΩ)

  • LED indicator

  • Selectable LED indicator color (7 colors available)

  • Remote LED indicator enable/disable

  • Remote configuration mode enable/disable

  • Supervision of motion detection and power supply circuits

  • Protection against opening and removal from the mounting surface (tamper protection)

  • Supplied with adjustable mounting bracket (BRACKET D) with tamper switch

SLIM-DUAL-PRO — Technical specification (EN)

ParameterValue
Supply voltage 12 V DC
Detected target velocity 0.2...3 m/s
Operating temperature range -10°C...+55°C
Recommended mounting height 2.4 m
Max. current consumption 85 mA
Weight 144 g
Maximum humidity 93±3 %
Dimensions (L x W x H) 62 x 137 x 42 mm
Environmental class according to EN50130-5 II
Alarm signaling time 2 s
Complied with standards EN 50131-1, EN 50131-2-4, EN 50130-4, EN 50130-5
Microwave frequency 24.125 GHz
Security grade according to EN50131-2-4 Grade 3
EOL resistors 2 x 1.1 kΩ / 2 x 4.7 kΩ / 2 x 5.6 kΩ
Warm-up period 30 s
Detection area 20 m x 24 m, 90°
Alarm outputs (NC relay, resistive load) 40 mA / 24 V DC
Tamper outputs (NC relay, resistive load) 40 mA / 24 V DC
Anti-masking outputs (NC relay, resistive load) 40 mA / 24 V DC
Relay contact resistance (alarm output) 26 Ω
Permissible installation height up to 4 m
Relay contact resistance (tamper output) 26 Ω
Relay contact resistance (anti-masking output) 26 Ω

Note: dimensions shown as Length x Width x Height; electrical parameters indicated in DC units.

 

Kabelių kriterijų reikšmės

Raksturojums

Krāsa Balta
© SIA “Eproma Latvia” Visas tiesības paturētas