JBE-2107 Conventional Heat Detector with Base

Датчики

Код товара: PSJBE-Temp

JBE-2107 is a conventional heat detector designed to operate on a zone line of conventional intelligent fire detection and alarm devices. This heat detector sends fire alarm signals to the fire panel when the air temperature (or its rate of rise) reaches the alarm thresholds defined in the European norm EN 54-5.

Together wth base JBE-2165.

Читать подробнее

Цена в физическом магазине может отличаться

Цена:

7,55 €

6,24 € без НДС

Сохранить

Имеется в наличии +100 Шт.
Delivery per 1 d.d

Информация о товаре

This detector features a remote indicator output.

The detector features three (3) sensitivity profiles: A2R, A2 and A2S. TheJBE-AT1 Programmer allowa selecting which threshold to apply to the detector.

3 certified heat sensitivities. Heat detectors are often used to detect fire in places where steam or dust can be present or where non-smoke fires might occur.

Heat rate-of-rise and static detector.

EN 54-5 certificate.

Specifications

Working voltage DC 16 - 30 V
Connection: 2-wire bus, no polarity
Wiring: Twisted pair, max. wiring gauge 2.5 mm2
Quiescent current: ≤0.1 mA @24 V
Activation current: ≥25mA @24 V (remote indicator current <15 mA )
Working temp. -10℃ ~ +50℃
Storage temp. -20℃ ~ +60℃
Environment ≤ 95% RH (40±2℃) (no condensation nor icing)
Configuration: Soft configuration with tool JBE-AT1, non-volatile
Protection area 20~30 m² (subject to local codes)
Red LED indication Standby: Flashing; Alarm: Steady on when in alarm
Dimensions Ø100 mm × 41 mm
Weight 0.1 kg
IP rating IP40
Compatible bases: JBE-2165 for installation with or without remote indicator
Remote indicator: LED with or without series resistor (Rs <4 kOhm)

Характеристика

Тип датчика	Температурный
Тип источника питания	24V

JBE-2107 Conventional Heat Detector with Base

Информация о товаре

Характеристика

Документы/сертификаты

JBE-2107 22 0370-CPR-6413

JBE-2107 DoP LT