Adresinė priešgaisrinė centralė PREVIDIA MAX

Išplėtimo dėžė PREVIDIA PRCAB

Valdymo modulis PREVIDIA FPMCPU

PREVIDIA centrāles un to piederumi

Preces kods: PSFPMCPU

Centralės/kartotuvo modulis.
Viena centralė gali talpinti daugiausia 2 šio tipo modulius.

Lasīt vairāk

In manufacturer warehouse
Jautājiet

Preces informācija

FPMCPU

Main control unit for Previdia Max control panels

To be connected to the CAN drive bar inside the metal cabinets and equipped with a graphic colour touchscreen.

This device manages the control panel and co-ordinates the various function modules.

A single Previdia Max control panel can house 2 of these units (a main unit and a secondary unit as backup). Mounts to the frontplate and, if housed in the upper opening, connects to the CAN drive bar. If housed in the lower opening, it connects to the FPM module in the upper opening.

Provides the following connections

Ethernet connection for networking and remote control.
RS485 channel for repeaters (FPMCPU used as remote keypads- max. 14).
RS485 channel for interfacing with Building Management Software, supports MODBUS RTU protocol.
Mini USB Port for configuration via PC.
RS232 Port for configuration via PC.

Order codes

FPMCPU main unit module

PRREP enclosure for mounting FPMCPU module as remote repeater

HARDWARE CHARACTERISTICS

Double CPUs, a main CPU and a emergency backup that will take over in the event of fault on the main CPU.
7’’ touch screen, 65000 colours
6 status LEDs
6 LED and function buttons
LED and button for multiple alarm management
Scandinavian key to access level 2 (EN54 part 2)
Ethernet port
RS232 port
Mini USB port
RS485 port for the connection of up to 14 repeater panels
RS485 port for ModBus RTU
Connector for the connection to other frontplate module
Housing for μSD card

TECHNICAL SPECIFICATIONS

Customization of user interface, icons, buttons etc.
Connection over RS485 or TCP/IP (if set as repeater)
Possibility to operate in three different modes: main control panel unit, backup unit,
remote repeater user-interface
Event visualization filter
Customization of event priority and visualization
Power voltage: 19-30Vdc
Consumption @ 27.6V: stand-by 120mA, max. 140mA
Maximum current on RS485-REPEATER @ 27.6V 1A
Maximum current on RS485-BMS @27.6V 1A

Raksturojums

Centrāles tips

Moduļu

Dokumenti / sertifikāti

Ražotājs

Inim develops state-of-the-art systems for antintrusion, fire detection, home automation and emergency lighting. Integrated systems of the newest design that protect and control automatically residential, commercial and institutional buildings. Inim innovates to simplify the life of the installer and the end-user by means of devices that are both easy to install and use. From design to production, from testing to marketing, every Inim product is made in Italy to be appreciated in the world.

Komplektējamās preces