Atom 9U Oxygen DCD12 Smart Home Controller 22IN/29OUT, 5/12DIMM

Код товара: EP9UOxygenDCD12

Atom Oxygen DCD12 Smart Home Controller is a comprehensive solution that fits best for controlling different types of lighting devices - including AC and DC loads with possibility of dimming and changing colors. In addition to light control, it is perfect for controlling devices such as garage doors, electric locks, pumps, actuators and others.

Читать подробнее
Цена в физическом магазине может отличаться
Цена:
876,04 €
724,00 € без НДС

Информация о товаре

Atom 9U Oxygen DCD12 Features:

  • CAN bus ensures synchronized operation of all Atom series devices.
  • Integrate 3rd party devices using RS-485 interface.
  • 5V and 3.3V ports for sensors power supply.
  • 22 multifunction input ports for temperature, air quality, water leakage sensors and switches connection.
  • 14 x 5A relays for connection of electrical devices
  • 5 x AC dimmers for controlling dimmable lamps
  • 12 x dimming outputs built on MOSFET

Technical Specifications

Inputs
Input ports 22 digital (9 of them with a possibility to work in analog mode)
Voltage range for input ports 0-3,3V (IN1-IN11), 0-5V (IN12-IN22)
ADC bit rate for input ports in analog mode 12 bit
Outputs 1-5
AC switching voltage 180 - 250VAC
Number of AC ports x Max switching load per one output 5 / 150W
Max inrush current 40A
Dimming capabilities Leading Edge
Outputs 6-17
Number of built-in normally opened relays / Active load 2 x 5А 250V AC
Max inrush current 30А
Outputs 18-29
Max AC switching voltage / DC switching voltage 4A / 48V
Max inrush current 40A
Dimming capabilities PWM (29 KHz)
Interfaces
CAN
RS-485 (Modbus protocol)
Digital interfaces on input ports 1-wire
Ethernet 10/100 Mb ✖ (in Atom Oxygen N +DCD12 modification)
WiFi 802.11 b/g/n 2,4 GHz ✖ (in Atom Oxygen N +DCD12 modification)
Bluetooth v4.2 BLE ✖ (in Atom Oxygen N +DCD12 modification)
Indication
Input and output ports status LEDs 
Ethernet port status LEDs ✖ (in Atom Oxygen N +DCD12 modification)

Power supply

  • Device power supply voltage (with protection against reverse polarity connection) 9 - 48V DC
  • Output voltage to power the sensors 3.3V (200mА), 5V (200mА)
  • Consumption (max) 15W

Other

  • Mounting type DIN rail (EN 60715)
  • Width, DIN units 9 DIN module
  • HxWxL 59 х 88 х 161 mm
  • Type of connectors / Recommended wire cross section inputs clamps / 0.2 - 1.5 mm²
  • Type of connectors / Recommended wire cross section outputs w/ screws, detachable/ 2,5 mm²

Atom Oxygen +DCD12  input’s specifications

Type of input /  # of input 1-2 3-11 12-16 17-22
Analog (thermistor, photoresistor, etc.)
Digital (motion sensors, light level sensors, switches, buttons, etc.)
Interface (1-Wire sensors)

Atom 9U comparison:

Model IN OUT QUANTITIES AND TYPES OF OUTPUTS
Ferrum +R12 22 22 8 relays,
14 relays
10A 250V AC
5A 250V AC / 30V DC
Argon +R12 22 30 30 relays 5A 250V AC / 30V DC
Neon +R12 22 24 16 relays,
8 dimm
5A 250V/30V DC
0-48V DC / 5A
Oxygen +DCD12 22 29

12 relays,
5 dimm
12 dimm

5A 250V AC / 30V DC
180–250V AC / 150W
0–48V DC / 4A

Oxygen +R12 22 29 24 relays
5 dimm
5A 250V AC / 30V DC
180–250V AC / 150W

Характеристика

Тип контроллера Atom 9U
© SIA "Eproma" Все права защищены